How Can I View a Live Still Image from a Network Camera?
FAQ #89

There are two ways with each camera to get a still image of a current event.

IK-WB02A and IK-WR01A

  1. Right click on the live view and click “save current picture as”

  2. Use any web browser to view a live image from the camera

    1. http://[camera ip]:[camera port]/Jpeg/CamImg.jpg

IK-WB01A and IK-WB11A

  1. From the live view, open the controller panel and click the camera-shaped icon.

  2. Use any web browser to view a live image from the camera

    1. No user restriction: http://[camera ip]:[camera port]/__live.jpg?&&&

    2. User restriction: http://[camera ip]:[camera port]/__live.jpg?&&[user login]&[user password]

IK-WB15A and IK-WB21A

  1. From the live view, open the controller panel and click "1 shot."

  2. Use any web browser to view a live image from the camera.

    1. http://[camera ip][:[camera port]/admin/__live.jpg

IK-WD01, IK-WD12A, IK-WR12A, IK-WD01IK-WB16A/IK-WB16A-W, IK-WB70A, IK-WB80A

  1. From live view, on the left hand side of the screen click on the camera-shaped icon.

  2. Using any web browser to view a live image from the camera

    1. http://[camera IP][:camera port]/cgi-bin/viewer/video.jpg

*Note [:camera port] is only needed if using a port other than port 80

FAQ Review

Please take a moment to help us improve this article by submitting the feedback form below.
  • If you would like to be contacted by someone regarding this please leave your name, email address and phone number.
  • This field is for validation purposes and should be left unchanged.